TOMCAT Volcano series Run10 120A Car brushless ESC (with 3in1 Program Card)
Product overview
Introduction
Tomcat Volcano series RUN 10 is the ESC applicable for RC cars. Design with good waterproof performance, it can work normally in all conditions, such as sandy, snow, and water gathered road. The ESC has the strong power and throttle response is so fast. It has comprehensive protection which can extend the service life and bring much more reliability for users. User can program the parameters via 3-in-1 programming card.
Features
- This ESC is compatible with both sensorless and sensored brushless motors (only in sensorless mode).
- Used the epoxy resin with waterproof and anticorrosion features in sealing treatment for Volcano RUN 10, the ESC can have the excellent performance to work normally in all conditions, such as sandy, snow, and water gathered road.
- The heat-conductive copper which is attached to the MOSFET board, combined with the silicone pad and the metal casing with slot for conducting heat makes the Volcano RUN 10 ESC has higher heat conductivity. With the high-performance fan, the perfect heat dissipation system is accomplished.
- Volcano RUN 10 ESC features an electronic switch with sealing treatment in epoxy resin. It prevents mechanical switch failure due to dust, moist, rust, etc.
- The output voltage of the internal switch-mode BEC is switchable (6V/7.4V), for using with various high-torque and high-voltage servos, which can bring much more fun for users.
- There are 5 levels of acceleration/punch from soft to aggressive, which can meet users’ need whatever for the off-road or on-road driving.
- It has 5 levels of maximum brake force, 8 levels of drag brake force for different vehicles, tires and playing fields in order to get the perfect feel.
- The temperature sensor between two capacitors can effectively protect capacitors from exploding and causing damage to the ESC from overloading.
- The Volcano RUN 10 ESC supports comprehensive protections such as low-voltage cutoff protection, thermal protection, fail safe, motor lock-up protection, overload protection, which can bring users safety and reliability.
- User can program the parameters via 3-in-1 programming card for convenience.
Specification
Model | Volcano RUN 10 |
Applications | 1:10 or 1:8 RC car,Short-Course Truck, Truck, Monster Truck |
Motor Type | Sensorless / Sensored Brushless Motor (only in sensorless mode) |
Motor Limit | Brushless motor with 2S Li-Po / 6 cells Ni-MH: KV≤6000 (3656 size motor) Brushless motor with 3S Li-Po / 9 cells Ni-MH: KV≤4000 (3656 size motor) Brushless motor with 4S Li-Po / 12 cells Ni-MH: KV≤3000 (3656 size motor) |
Cont. Current | 120A |
Burst Current | 830A |
Battery | 2S~4S Li-Po, or 6~12 cells Ni-MH |
BEC Output | 6V/7.4V switchable, continuous current of 4A (switch-mode) |
Weight | 95g |
Size | 53*39*35mm (W/fan) |
Programmable Item
Programmable Items | Option Parameter | |||||||
1.Run Mode | Normal | *Reverse | ||||||
2.LiPo Cells | *Auto | 2S~4S | ||||||
3.CutOff Voltage | Disabled | 2.8V~3.8V (Default: 3.0V) | ||||||
4.ESC Thermal Protection | *105C/221F | 125C/257F | ||||||
5.BEC Voltage | *6.0V | 7.4V | ||||||
6.Maximum Brake Force | Disabled | 25% | *50% | 75% | 100% | |||
7.Maximum Reverse Force | 25% | *50% | ||||||
8.Punch Level | 1 | 2 | *3 | 4 | 5 | |||
9.Drag Brake | *25 | 50 | 75 | 100 | 125 | 150 | 175 | 200 |
