OSD Information Display Function: Real-time Monitoring of Flight Data.
The built-in OSD shows the plane's altitude, speed, posture, and distance on the screen.
When it cooperated with Detrum Blitz-DT9 Transmitter and RXC9M receiver, it can return real-time voltage, altitude, speed, altitude, distance, satellite signal, and other information to the transmitter in real-time, with voice broadcast and record the maximum & average value of information after the aircraft landed for analysis.
Independent PMU: Stable Power Supply Guarantee.
The PMU supports 2-6S, can provide a stable power supply (5V) for flight control, camera, and other equipment, and can collect current, voltage, and other information.
One-click RTH & Fail Safe: The Guarantee of Safe Flight
Toggle the remote control RTH switch when required. The aircraft will maintain the current altitude(By default, when manually returning home, the aircraft will climb to 60 meters when the altitude is lower than 60 meters and lower to 120 meters when it is higher than 120 meters.), and the autopilot will return to the take-off point side by side-waiting for you to regain control of the aircraft(The default circle radius is 50 meters). Parameters such as return speed and hovering radius can be set in the programming card according to the properties of the aircraft.
With an out-of-control protection function (DSM, S.BUS receiver is activated automatically, PPM receiver needs to set out-of-control protection), when the aircraft flies out of the remote control range or the signal is bad, Z3-FPV flight control will automatically take over the aircraft, the height * keep 100 meters Fly back to the take-off point and circle (circling radius 50 meters) waiting for you to regain control of the aircraft.
Compatible with Most Receivers on the Market
Z3-FPV is compatible with Spektrum, Futaba, Detrum, and all other transmitters on the market and supports DSM, S.BUS, and PPM receivers. And by connecting with Detrum's programming card, it is convenient for parameter setting and simple and intuitive operation. When working with Blitz-DT9 and RXC9M receivers, it can transmit real-time information such as voltage, altitude, speed, posture, distance, satellite signals, Etc. to the transmitter and can perform voice broadcasts. And record the maximum value and average value of information after the aircraft landed for analysis.
Main Control IC - 32-bit high-performance ARM core processor, 6-axis MEMS gyro chipset, barometer.
Control Algorithm - Original airplane attitude stabilization algorithm and control algorithm. Support normal-wing, delta-wing, V-tail airplanes, and 3D planes.
Flying Mode - There are five modes: Gyro Off Mode(OFF), Normal Mode(normal), Auto-Recovery Mode(Safe), Aerobatic Mode(Aerobatic), and Return to Home Mode(RTH). Different modes can be switched during flying.
Adjusting the Gain - Set the gain and other programmable items with a 3in1 program card.
Firmware Upgrade - With the USB upgrade function, manufacturers continue to update the function and upgrade firmware.